manualshive.com logo in svg

Novus NHDR-4304AHD, User Manual, Page: 44 / 124

Share
Download
Novus NHDR-4304AHD User Manual Download Page 44

NHDR

-

4xxxAHD user’s manual ver. 1.1

 

All rights reserved © AAT Holding S.A.

 

 

44

 

RECORDING

 

The 

Capture  Schedule

  tab in  the 

Capture

 submenu contains a  graphic presentation  of the periods 

when pictures are to be saved. The table rows contain the days of the week (SUN 

-

 Sunday, MON 

-

 

Monday, TUE 

-

 Tuesday, WED 

-

 Wednesday, THU 

-

 Thursday, FRI 

-

 Friday, SAT 

-

 Saturday). The 

columns contain hours. A single field corresponds to 30 minutes of registration.

 

Select the channel to edit in the 

Channel

 field. Then select the recording mode and use the mouse to 

select the fields corresponding to the time of day when the image should be recorded. Each mode is 
marked with a different color:

 

Normal 

-

 normal recording, continuous recording (green color bar).

 

Motion 

-

 recording in the event of motion detection (yellow color bar).

 

IO 

-

 recording in the event of activation of the alarm input (red color bar).

 

PIR 

-

 recording in the event of PIR detection (purple color bar).

 

Gray color means no recordings in a given period.

 

Individual modes can be combined as in the example above.

 

 

The settings in the table apply only to a single channel. The 

Copy

 button allows to copy individual 

channel schedule settings to other channels. The 

Default

 button restore schedule to default parameters 

of all cameras (sets no  recording for whole week). The 

Apply

 button saves all the changes.

 

Summary of Contents for NHDR-4304AHD





























































































































Reviews:

No comments