Novus NHDR-4304AHD User Manual Download Page 60

Page: 60 / 124

NHDR

4xxxAHD user’s manual ver. 1.1

NETWORK SETTINGS

The

Email Schedule

tab contains a graphic presentation of the periods when e

mails are to be sent.

The table rows contain the days of the week (SUN

Sunday, MON

Monday, TUE

Tuesday, WED

Wednesday, THU

Thursday, FRI

Friday, SAT

Saturday). The columns contain hours. A single

field corresponds to 30 minutes. The schedules are enabled for all types of events all the time by
default.

The schedule can be defined individually for each channel. E

mail can be sent in the case of:

motion detection

green

color.

activation of alarm inputs

yellow

color.

system exception (full disk, damage disk, video loss)

red

color.

intelligent analysis events

blue

color.

PIR alarm

purple

color.

Lack of color means turning off the mailing function at a specific time. Individual modes can be
combined, as in the example above.

There are buttons in the bottom right corner:

Copy

copies the schedule parameters from the selected channel to other channels.

Default

restores the default settings for this screen.

Apply

saves the settings.

8.3. FTP settings

The recorder allows to define FTP server, to send pictures or video records.

Enter the FTP server settings in the FTP tab:

FTP Enable

enable / disable FTP server settings.

Server IP

name or IP address of the FTP server.

Port

the port for FTP connection (the port is set to 21 by default).

Summary of Contents for NHDR-4304AHD





























































































































Search results

Summary of Contents for NHDR-4304AHD

Reviews:

Novus NHDR-4304AHD, User Manual, Page: 60 / 124

Search results

Summary of Contents for NHDR-4304AHD

Reviews: