Novus NHDR-4304AHD User Manual Download Page 62

Page: 62 / 124

NHDR

4xxxAHD user’s manual ver. 1.1

NETWORK SETTINGS

The

FTP Schedule

tab contains a graphic presentation of the periods when pictures and video

recordings are to be sent to the FTP server. The table rows contain the days of the week (SUN

Sunday, MON

Monday, TUE

Tuesday, WED

Wednesday, THU

Thursday, FRI

Friday, SAT

Saturday). The columns contain hours. A single field corresponds to 30 minutes. The schedules are
enabled all the time for motion detection, alarm inputs, PIR alarm and intelligent video analysis events
by default.

The schedule can be defined individually for each channel. Pictures and video records can be sent to
FTP server in the case of:

continuous recording

green

color.

motion detection

yellow

color.

activation of alarm inputs

red

color.

PIR alarm

purple

color.

intelligent analysis events

blue

color.

Lack of color means disabling the FTP function at a specified time. Individual modes can be
combined, as in the example above.

There are buttons in the bottom right corner:

Copy

copies the schedule parameters from the selected channel to other channels

Default

restores the default settings for this screen.

Apply

saves the settings.

Summary of Contents for NHDR-4304AHD





























































































































Search results

Summary of Contents for NHDR-4304AHD

Reviews:

Novus NHDR-4304AHD, User Manual, Page: 62 / 124

Search results

Summary of Contents for NHDR-4304AHD

Reviews: