Novus NHDR-4304AHD User Manual Download Page 40

Page: 40 / 124

NHDR

4xxxAHD user’s manual ver. 1.1

RECORDING

6. RECORDING

The

Record

menu allows to set parameters and how to record video.

The

Encode

submenu has three tabs containing settings for video streams:

Mainstream

Substream

and

Mobilestream

. The parameters of each stream can be configured independently. The

Mobilestream

is available only for Novus 2000 and 4000 series IP cameras supporting this function.

The table columns are described below. Some columns may not be visible, to see them you need to
move the scroll bar at the bottom of the screen:

Channel

channels number.

Stream type

stream type information (

Normal

Alarm

). The type is

Normal

by default, if the ETR

option is enabled for the channel, the

Alarm

stream also appears for it.

Resolution

selection of recording resolution. It depends on camera resolution and its settings.

FPS

setting the number of frames per second of the recorded stream (from 1 to 30, depend on the

recorder model and set resolution).

Video Encode Type

selection of the video coding method (

H.264

H.265

Bitrate Control

the type of bit rate.

CBR

constant bitrate stream,

VBR

variable bitrate stream.

Video Quality

defines the quality of recordings for the variable bitrate stream (

Lowest

Lower

Low

Medium

Higher

Highest

Bitrate mode

Predefined

bitrate selection from the list,

User

defined

value entered manually.

Bitrate

bitrate (kbps), defines the quality and the size of recordings. The higher the value, the better

quality of recordings. If

Bitrate mode

is set to

Predefined

Bitrate

value is selected from the list.

Maximum

Bitrate

value for analog cameras is

8192

in NHDR

43xxAHD recorders ,

4096

NHDR

41xxAHD recorders.

Audio

allows to record the sound together with the video image.

I Frame Interval

determines the interval between base frames. Option available only for IP cameras.

ETR

allow to set different stream parameters for events (event recording). It is available analog

cameras and IP cameras supporting this function.

Note! NHDR

41xxAHD recorders save the 4Mpx video streams in 2560x1440 or 1280x1440

resolution depending on the camera settings (NRT option).

Summary of Contents for NHDR-4304AHD





























































































































Search results

Summary of Contents for NHDR-4304AHD

Reviews:

Novus NHDR-4304AHD, User Manual, Page: 40 / 124

Search results

Summary of Contents for NHDR-4304AHD

Reviews: