Novus NHDR-4304AHD User Manual Download Page 17

Page: 17 / 124

NHDR

4xxxAHD user’s manual ver. 1.1

MAIN SCREEN

The summary displays parameters settings. The user can select

Don’t show this window next time

check box to stop displaying the wizard after DVR restart. The

Finish

button saves all settings and

closes the wizard.

3. MAIN SCREEN

When the initialization process is complete, live camera images are displayed on the monitor screen.

Moving the mouse cursor to the bottom of the screen displays the menu bar.

To display the menu in the recorder, press menu button

, then select

Settings

. A detailed

description of the menu can be found later in this manual.

Then, log in with the using created datas.

The menu bar contains the following options:

Expands the additional menu described below.

Currently logged in user, click to switch user.

Starts the playback mode of recordings.

Displays the recorder menu.

User logout.

Allows to disable DVR, reboot, log out.

Select the split video window (double

click on the image displays

the camera in full screen mode. Double

clickg again reverts to split.).

Summary of Contents for NHDR-4304AHD





























































































































Search results

Summary of Contents for NHDR-4304AHD

Reviews:

Novus NHDR-4304AHD, User Manual, Page: 17 / 124

Search results

Summary of Contents for NHDR-4304AHD

Reviews: