Novatel OEM6 User Manual Download Page 89

Page: 89 / 175

OEM6 Family Installation and Operation User Manual Rev 7

Chapter 8

NovAtel Firmware and Software

Download the most recent versions of the NovAtel firmware and receiver software from the Downloads
section of

www.novatel.com/support/search/

OEM6 Firmware and Software

NovAtel Connect PC Utilities Software Bundle

Bundled PC Utilities software includes:

•

NovAtel Connect (a GUI interface)

•

Connection Import (improves connection profiles)

•

Convert (converts receiver data logs into different formats)

•

USB Drivers and Window Signing

Firmware and Software included

•

Firmware *.shex file

•

WinLoad software utility

8.1

Firmware Updates and Model Upgrades

A local NovAtel dealer can provide all the information needed to upgrade or update a receiver. Refer to

www.novatel.com/where-to-buy

for contact information or contact

[email protected]

directly.

8.1.1

Firmware Updates

Firmware updates are firmware releases that include fixes and enhancements to the receiver
functionality. Firmware updates are released occasionally on the NovAtel web site as they become
available.

Firmware upgrades can be performed using the WinLoad utility, SoftLoad commands or with a

custom loader application. Contact NovAtel Customer Support (

[email protected]

)

for details on

custom loader requirements.



Refer to

8.3.1, Transferring Firmware Files

page 91

for descriptions of

the Update and OEM versions.



The NovAtel Connect PC Utilities bundle can be download from the
Downloads section of

www.novatel.com/support/search/



WinLoad and SoftLoad instructions follow.

Summary of Contents for OEM6
















































































































































































Search results

Summary of Contents for OEM6

Reviews:

Related manuals for OEM6

Brands by name

Popular brands

Novatel OEM6, User Manual

Search results

Summary of Contents for OEM6

Reviews:

Related manuals for OEM6

Brands by name

Popular brands