OEM6 Family Installation and Operation User Manual Rev 7
141
D.1.1.2
I/O DB-HD15 Strobe Port Cable (NovAtel part number 01018651)
The strobe lines on the FlexPak6 can be accessed by inserting the female DB-HD15 connector of the
I/O strobe port cable into the I/O port. The other end of this cable is provided without a connector to
provide flexibility. The jacket insulation is cut away slightly from the end but the insulation on each wire is
intact. The cable is approximately 2 m in length. See
. This cable is RoHS compliant.
Figure 71: I/O DB-HD15 Strobe Port Cable
Table 33: I/O Strobe Port Cable Wiring
I/O Port Pin
I/O Port Signal
I/O Port Cable Wire Color
Not connected
Blue
5
Ground
White/Grey
9
MODE
Red
10
EVENT2
Green
11
EVENT1
Orange
12
VARF
Black
13
ERROR
Violet
14
PV
Yellow
15
PPS
Brown
All unlisted pins on the cable are not connected.