Novatel DL-V3, Reference Manual

Page: 85 / 116

DL-V3 Logs Chapter 3
DL-V3 Firmware Reference Manual Rev 2 85
3.8 GROUPCOMCONFIG COM Port Configuration Information
The groupcomconfig log contains COM port configuration information for the currentgroup
specified for the receiver.
If no valid currentgroup selection is specified, this log lists COM port configurations for all groups
present on the receiver.
Structure: Message ID = 754
Log Type: Polled
Field # Data Description Bytes Format Units Offset
1 Header Log header, see Page 75 - - - 0
2 Group name Group name 12 Char[ ] H
3 # ports Number of ports 4 Long H+12
4 Port Serial port identifier, see Table 55
on Page 76
4 Enum H+16
5 Status Com config status word, see
Table 60 on Page 86
4 HexUlong H+20
6 Baud Communication baud rate 4 ULong H+20
7 Parity See Table 56 on Page 76 4 Enum H+24
8 Databits Number of data bits 4 ULong H+28
9 Stopbits Number of stop bits 4 ULong H+32
10 Handshake See Table 57 on Page 76 4 Enum H+36
11 Echo When echo is on, the port is
transmitting any input characters as
they are received.
0 = OFF
1 = ON
4 Enum H+40
12 Breaks Breaks are turned on or off
0 = OFF
1 = ON
4 Enum H+44
13 Rx_type The status of the receive interface
mode, see
Table 58, Serial Port
Interface Modes on Page 77
4 Enum H+48
Continued on Page 86