DL Explorer
Chapter 4
DL-V3 Firmware Reference Manual Rev 2
101
4.2
Receiver Operations
DL Explorer
can communicate with the DL-V3 to establish data collection groups.
The DL-V3 can collect several types of data. A group is a profile that tells the receiver what type of
data to collect, at what rate the data should be collected and where the data should be stored (for
example, to the CF card). Use the POWERUP group for automatic data collection on start-up.
4.2.1
Receiver Groups
To start logging data, you must create a group profile and transfer it to the DL-V3. When configuring
your group profile, you can define the group settings to determine the type of information the DL-V3
collects. These group profiles consist of the log type, the data destination, the trigger, period and a
description for each log within the group.
To edit a group, click on the
Edit DL Groups...
button:
.
The
DL Groups
dialog appears. An example is shown in
Figure 4: DL Groups Dialog
The
DL Groups
panel, to the left of the dialog, displays the names of the current groups including
groups you defined, and the preset POWERUP group provided by
DL Explorer.
The POWERUP
group can be modified from the software, see
Section 4.2.1.2, Preset POWERUP Group
.
Edit a group name by clicking on it directly in the left side panel. Add a new group using the
button, remove a group using the
button or duplicate a group using the
button.
