Be advised!
The disc mower cutter blades are freely
accessible if the roller conditioner
is dismounted. Maximum danger of
injury exists. When mowing without
a conditioner, protection elements
especially designed for this operating
mode, must be installed on cutter
bar . These safety elements are not
included in the scope of delivery for
a new machine with conditioner. The
parts must be ordered additionally (see
spare parts list, component: "REAR
PROTECTION“).
Maintenance
Caution!
Shut engine off and remove key before
carrying out maintenance or repair work.
Cleaning: (every 20 hours in operation)
WA
• Screw off the covers and maintenance openings (WA)
at the v-belt and chain drive
• Remove dirt deposits
• Clean rubber rollers
Dirt may impair lubrication leading to
damage to property!
Chain drive maintenance unit
Lubrication: (every 20 hours in operation)
The following oils are recommended
for the central lubrication device:
- H E E S 4 6 s y n t h e t i c o i l
- HLP 46 hydraulic oil
Only use clean oil!
s
The drive chains are lubricated via the main lubricating
device. A lubricating impulse is released every time the
mower is raised
• Functional check of lubricating device (S)
• Check oil level (The oil container is attached at the
bearing frame)
Check the oil level at the main lubrication
unit prior to each use. Operation without
sufficient lubrication causes damage to
the drive chains.
Old oil pump
until July 2011
New oil pump
from August 2011
The old pump (until end of July 2011) does not allow ad-
justment of oil volume per lift. (see illust. 369-12-08) Pump
is located on conditioner below oil reservoir (1).
The new pump (from August 2011) allows adjustment of
oil volume per lift:
Correct setting for oil volume per lift:
The smaller the field the more often the mower lift per unit
of time is triggered, so select the LOWEST oil volume to
be injected per lift.
Set oil volume using adjusting screw (2) and lock nut (3).
The further the adjusting screw is screwed into the pump,
the lower the oil volume per lift.
- 43 -
1600-GB_WALZENAUFBEREITER_3843
ROLLER CONDITIONER
GB
