- 47 -
1500-GB CONDITIONER_3846
GB
Mowing with the conditioner
The conditioner effect can be modified.
- The distance between the adjusting strip and the rotor
is set using lever (13).
Conditioning is strongest in the deepest position (pos.
3)
However, the fodder must not be beaten.
Rotor speed 700 rpm
- less deterioration of the mowed material
Belt discs, belts and the belt protection must be replaced.
See the spare parts list for the parts.
Correct V-belt tension
Control size X2
Rotor speed (rpm) *
Size X2 (mm)
700
192
900
202
*) function of which belt disc the tine conditioner is equipped
with.
Rotor tines:
1. Replacing tine fastening
If signs of strong wear are found on the tine fixings, then
the affected component(s) must be replaced. (tines, screw,
clamping sleeve, ...)
2. Rotor tines position
Pos. Z1: Rotor tines position for normal operating conditions.
Pos. Z2: For difficult operating conditions, e.g. if the fodder
winds around the rotor.
Turn the rotor tines 180° (pos.Z2). This tine position solves
the problem in most cases. However, the conditioning effect
is thereby somewhat reduced.
TINE CONDITIONER
