- 18 -
1400_GB-Power Control_3843
POWER CONTROL
GB
Lower left mower unit
Lowers left mower unit from field transport to working position
Lower front mower
Lowers front mower from field transport to working position
Lower right mower unit
Lowers right mower unit from field transport to working position
Lower all mower units
Lowers all mower units from field transport to working position
Raise left mower unit
Raises left mower unit from working position to field transport position.
Raise front mower
Raises front mower from working position to field transport position
Raise right mower unit
Raises right mower unit from working position to field transport position
Raise all mower units
Raises all mower units from working position to field transport position
R o a d t r a n s p o r t
preselection
1. Press preselection key to make raising to and lowering from road
transport position possible.
2. Press either the [Raise] or [Lower] key to move the respective mower
units to, or out of, the road transport position.
Stop
Stops any raising or lowering process.
Hard keys: Raising and lowering cross conveyor (only Novacat X8 Collector)
Raise cross conveyor
Raises both or the preselected cross conveyor
Lower cross conveyor
Lowers both or the preselected cross conveyor
Right cross conveyor
preselection
1. Press the preselection key to make raising or lowering an individual cross
conveyor possible. The symbol "Right cross conveyor preselection"
2
appears on the display.
2. Press the appropriate key, [Raise] or [Lower], to move the relevant
cross conveyor.
Left cross conveyor
preselection
1. Press the preselection key to make raising or lowering an individual cross
conveyor possible. The symbol "Left cross conveyor preselection"
2
appears on the display.
2. Press the appropriate key, [Raise] or [Lower], to move the relevant
cross conveyor.
Note!
Any menu can be
exited by pressing
the ESC key.
Note!
To be able to
activate the key
[Road transport
preselection],
both cross
conveyors must
be in the working
position.
Note!
To be able to
activate the key
[Road transport
preselection],
all mower units
must be in the
field transport
position.
Note!
To change to road
transport position
cardan shaft must
be idle. The [Road
transport] key
will not function
as long as the
cardan shaft is
turning.
Note!
Pressing the "Road
transport prese-
lection" key
will depressurize
the side protec-
tion hydraulic
hoses. (e.g. be-
fore uncoupling)
