NOVACAT V10 ED, Translation Of The Original Operating Manual

Page: 20 / 86

- 20 -
1400_GB-Power Control_3843
POWER CONTROL
GB
Set menu
M3
In the Start menu, press function key , to open the Set Menu.
Press function key , to return to the Start Menu.
Note:
The values
for the distance
controlled delay
will not appear if
the speed has not
been selected in
the configuration
menu.
12 11
1
3
2
5 4
7
6
10
8
9
Display:
1…. Type of machine
2…. Front mower working width (only Novacat V10)
3 ... Time or distance controlled delay when
lowering the rear mower.
4 ... Column for the distance controlled delay
5 ... Column for the time controlled delay
6 ... Line for lowering the mower unit
7 ... Line for raising the mower unit
only Novacat X8 Collector:
8 ... Speed selection for cross conveyor belt:
Tick = Differing speeds between the left and right
cross conveyor belt (for mowing in contour lines)
Cross = Same speed for both cross conveyor
belts with the possibility of switching between
two speeds.
9 ... Speed regulator for speed 1
(Tortoise): same percentage =
same speed
10 ... Speed regulator for speed 2
(Hare):
only Novacat V10:
11 ... Voltage value for the left angle sensor
12 ... Voltage value for the right angle sensor
Function keys:
... Edit menu entry
... page down
... page up
... change to higher menu (here: Start
Menu)