- 38 -
1400_GB-EINSATZ_3846
GB
OPERATION
1. Check
- the condition of knives and the knife fastenings.
- the mowing discs for damage (see chapter "Maintenance
and Service").
2. Only switch the machine on when in the
working position and do not exceed the
stipulated p.t.o. speed!
A transfer located near the transmission advises which
p.t.o. speed your mower unit is equipped for.
• Always and only switch the p.t.o.drive on when all safety
devices (covers, protective aprons, casings, etc.) are
in proper condition and are attached to the implement
in their safety positions.
3. Pay attention to correct p.t.o.
direction of rotation!
4. Avoid any damage!
The area to be mowed must be free
of obstacles or foreign objects. Such
objects (e.g. large stones, pieces of wood,
boundary stones, etc.) can damage the
mower unit.
In the event of a collision
• Stop immediately and switch off the drive.
• Check the implement carefully for any damage In
particular check the mowing discs and their drive shafts
(4a).
• If necessary have it checked over in the work shop as
well.
After contact with a foreign object
• Check the condition of knives and the knife holder (see
chapter "Maintenance and Service").
• Retighten all knife screw fittings.
TD8/95/6a
01-00-10
4a
1 0 0 0 U p m
Safety
hints:
See Supplement A,
pt. 1. - 7.)
Be advised!
After the first hours
of operation
• Retighten all knife
screw fittings
Important notes prior to starting work
5. Keep away from the engine when running.
• Guide people out of the danger area as they may receive
injuries from foreign objects being ejected by the mower.
Special care is necessary on stony ground and near
roads and paths.
6. Wear hearing protection
The noise level in the workplace can
deviate from the measured value (see
Technical Data) partly because of the
differing cabin types of various tractors.
• If an 85 dB(A) noise level is reached or exceeded, then
the farmer (or contractor) must provide appropriate
hearing protection (UVV 1.1 § 2).
• If a noise level of 90 dB (A) is reached or exceeded,
then hearing protection must be worn (UVV 1.1 § 16).
bsb 447 410
Be advised!
Check all safety
equipment before
starting work. In
particular ensure
that the side pro-
tection devices
are folded down
correctly in the
off-road transport
position!
