- 19 -
1400_GB-Power Control_3843
POWER CONTROL
GB
Cross conveyor speed
levels
(Optional extra)
Press the key to change the speed level of the cross conveyor belts.
One of two levels can be selected which are represented by a "hare"
or a "tortoise"
Go to the Set menu to adjust the speed of the speed level.
Hard keys: Side shift (only Novacat V10)
Slope travel preselection 1. Press the preselection key to move both rear mower units in the same
direction, one after the other.
2. Press the appropriate key [side shift] to start the side shift in the relevant
direction. The mower units then move one after the other.
Decrease working width /
side shift left
Decreases working width of mower so that both mower units move inward
to end position.
In conjunction with [Slope travel preselection], both rear mower units
move to the left.
Increase working width /
side shift right
Increases working width of mower so that both mower units move outward
to end position.
In conjunction with [Slope travel preselection], both rear mower units
move to the right.
Note!
The keys "Decrease working width" and "Increase working width" are stayput keys (function activated
by briefly pressing the key).
The function is interrupted with the STOP key or by pressing the key for the opposite direction. If
function is interrupted with STOP key, no arrow appears in the display.
Note!
When mowing on slopes it is sensible to position both mower units uphill. Doing so will prevent
streaking.
Note!
Adjusting the working width is only possible in the working and field transport positions.
If both mowers are to be moved to the transport position and one of the mower units is in the field
transport position at max. working width, firstly bring both mower units to min. working width so as
not to exceed the 4 m transport height.
Set relief pressure for hydraulics
Adapt the relief pressure to the ground conditions.
1. Ensure that both mower units are in the neutral position. Otherwise the relief pressure cannot be adjusted.
2. Raise an outside rear unit. If this is even possible, this is equivalent to a relief pressure of approx. 70kg.
3. Press the function keys
or
to adapt the relief pressure to the ground conditions.
Note!
Raise an outside
rear unit. If this
is even possible,
this is equivalent
to a relief pres-
sure of approx.
70kg.
