- 7 -
1500_GB-ATTACHING_3846
GB
ATTACHING TO TRACTOR
Adjust upper link spindle
- Turning upper link spindle (16) adjusts the cutting height.
A hydraulic upper link is recommended
(double-acting control unit)
Attach connecting lines from the front
mower.
K
"Power Control" variant
With the “Power Control” variant, the possibility exists of
controlling the front mower's automatically folding side
protection along with the rear mower. (Optional extra)
Note:
The hydraulic hoses between front
mower and rear mower are pressurized.
These must be depressurized before
disconnecting.
Power Control Press key
until
signal tone is heard (approx. 3 Sec)
ISO Bus: Press key
until signal
tone is heard (approx. 3 Sec)
Establish an electrical connection to
tractor
Operating unit on tractor with ISO Bus control
- Connect 9-pin ISO plug to ISO-Bus socket on tractor
473A2000.0
Operating unit on tractor without ISO Bus control
- Attach connection cable between 9-pin ISO plug and
3-pin socket DIN 9680 on tractor or operating unit
Lighting:
- Connect 7-pin plug to tractor
- Adjust lighting carrier position (S1)
- Clean and check that lighting on mower functions
properly.
