- 8 -
1500_GB-ATTACHING_3846
GB
ATTACHING TO TRACTOR
Important!
Check the vehicle
for roadworthi-
ness prior to
every operation
(lights, brakes,
protective panels,
…)!
Connect sensor cable from front mower
Electrical cable connection between front mower
and mower combination
- 3-pin cable for sensor attachment kit (1)
(Starting from the back, lay sensor cable to tractor so
that the cable cannot become damaged e.g. tyres,
exhaust, ...)
Detach cardan shaft
- Before initial operation, check the cardan shaft length
and adapt if necessary. See chapter "Drive Shaft" in
Supplement B also.
Hydraulic connection
Minimum hydraulic system:
1 single-acting hydraulic circuit (EW) with depressurized
return flow (T)
Optimum hydraulic system:
1 single-acting hydraulic circuit (EW) with depressurized
return flow (T)
1 dual-acting hydraulic circuit (DW) for hydraulic upper link
or
1x Load sensing hydraulic circuit (LS) (Optional extra)
consisting
of:
- single-action hydraulic circuit (EW)
- pressureless return (T)
- load sensing line
1 dual-acting hydraulic circuit (DW) for hydraulic upper link
Settings
The screw (7) on the hydraulic block must also be adjusted.
Be advised!
Separate electrical connection
For tractors with "Load sensing"
- Screw in screw (7) completely on hydraulic block
For tractors with a closed hydraulic system
- Screw in screw (7) completely on hydraulic block
For tractors with an open hydraulic system
- Unscrew screw (7) completely on hydraulic block
