- 39 -
1400_GB-EINSATZ_3846
OPERATION
GB
1. Set mowing height by turning the upper link
spindle (max. 5° mowing disc incline).
2. For mowing, slowly engage the p.t.o. shaft
away from the crop and bring the mower rotor
up to full speed.
Smoothly increasing the p.t.o. speed will avoid system-
related noises from the p.t.o. free-wheel.
- The driving speed depends on the ground conditions
and the crop to be mown.
Mowing
Anti-collision device
When mowing around trees, fences, boundary stones etc., collisions between the cutter bar and obstacles can occur despite
careful and slow driving. So in order to prevent such damage, an anti-collision device has been provided for the mower.
The function of the hydraulic anti-collision device:
The accumulator pressure will then swing the cutter bar
automatically back to the starting position.
Set accumulator pressure:
- Depressurise control valve on tractor.
- Connect plug coupling (St) to the tractor.
- Open shut-off valve (Ab).
- Actuate servo-valve on tractor until pressure setting is
reached -> see manometer (Ma) display.
Pressure setting: 110 bar
- Close shut-off valve (Ab).
Be advised!
It is not the
purpose of the
collision safety
device to prevent
damage to the
machine when
working at full
speed.
Ma
Ab
St
161-09-02
Reversing
Raise the mower when reversing!
