Possible settings
When delivered, the roller conditioner is preset for medium
intensity. For optimum adaptation to the surrounding con-
ditions the following adjustments can be made:
Distance between rollers:
The distance between the rollers is equally set, left and
right, using the adjustment screw (1). Basic setting: (X)
= 70 mm.
1
X
Because of component tolerances an
uneven roller gap can occur despite basic
setting. Check and unilaterally adjust the
adjustment screw (1) if necessary.
Upper roller spring pre-tension:
WS
SE
The upper roller is moveable and is tensioned left and right
with a spring. The spring tension intensity can be adjusted
at any time with nut (WS).
Standard setting (SE): 210 mm
Set swath width:
ES
The swath boards shape the cut and conditioned fodder
to the desired swath width. Adjusting the swath board is
carried out identically left and right by opening and adjusting
the adjusting screw (ES).
Operation
Driving speed:
Adapt the speed to fodder consistency. Travelling too fast
reduces conditioning quality and evenness.
Working without roller conditioning:
If required the roller conditioner can also be removed and
replaced with a tine conditioner or swath former. (Contact
sales department for more information.)
A machine with a conditioner as a complete unit is fitted
with the proper protective devices. Should the conditioner
be removed then the mower unit is no longer completely
encased. In this case mowing must not take place without
fitting additional protective devices!
- 42 -
1600-GB_WALZENAUFBEREITER_3843
ROLLER CONDITIONER
GB
