- 32 -
1401_GB-ISObus Terminal_3846
ISOBUS TERMINAL
GB
Data menu
T8
F6
a
b
d
c
T8 Delete partial counter (ha, h)
Meaning of display:
a
... Partial ha. counter
b
... Total ha. counter
c
... Partial hours counter
d
... Total hours counter
Transport menu
F4
T7
T8
T9
T2
T3
T4
T2
Change to page 2 (change over to mask (F5))
T3 Swivel selected cross conveyor out
T4 Swivel selected cross conveyor in
T7
Select "Change from working position to transport
position"
Press key T7 for 3 secs. -> the side protection
hydraulic hoses are depressurized (e.g. before
uncoupling)
T8
Raise mower units to road transport position
T9
Lower mower units to turning position
F5
T7
T8
T9
T10
T2
T3
T4
T2
Change to page 1 (change to mask (F4))
T3
Raise front mower
T4
Lower front mower
T7
Raise left mower unit
T8
Lower left mower unit
T9
Raise right mower unit
T10
Lower right mower unit
Note!
Pressing preselec-
tion key "Trans-
port position"
for 3
secs. will de-
pressurize the
side protection
hydraulic hos-
es. (e.g. before
uncoupling)
Note!
In order to activate
the [Preselect
road transport]
key, both cross
conveyors must
be in the working
position.
Note!
In order to press
the [Preselect
road transport]
key, all mower
units must be in
the field transport
position.
Note!
In order to move to
the road trans-
port position,
the cardan shaft
must be idle. The
[Preselect road
transport] key
cannot be used
while the cardan
shaft is still
turning.
