AFP-400 Installation
PN 50253:A2 03/12/96
1-7
System Components
The following table contains a list of optional components that can be installed
in an AFP-400 system.
Optional Devices
Option
Description
UDACT
A Universal Digital Alarm Communicator/Transmitter (UDACT)
transmits system status to UL Listed Central Station Receivers
over a public switched telephone network. The UDACT
mounts in the AFP-400 cabinet or mounts remotely in the
ABS-8R. The UDACT connects to the EIA-485 annunciator port
and 24 volt (nominal) power.
4XTM
Transmitter
Module
A 4XTM module provides municipal box and remote station
transmitters meeting NFPA 72-1993 Auxiliary and Remote
Station requirements. Includes a Disable switch and an
indicator.
Trim Ring
A gray trim ring is available for semi-flush mounting of the
CAB-3 Series cabinet.
Battery Boxes
The AFP-400 can include one of the following battery boxes:
BB-17 battery box can contain up to two 17AH batteries.
BB-55 battery box can contain up to two 55AH batteries.
Mount a battery box directly below the control panel cabinet.
AVPS-24
Expansion
Power Supply
An AVPS-24 provides an additional 3 amps of notification
appliance power and runs with an ICM-4 or ICE-4 module.
UZC-256
Universal Zone
Coder
A UZC-256 module is a circuit board used for zone coding
applications that provides three output circuits and up to
256 zone codes.
NIB-96
Network
Interface
Board
A Network Interface Board (NIB) is a microprocessor-
controlled module that connects slave control panels to a
master control panel. The NIB-96 module can be installed in
each slave FACP. Each slave FACP can contain as many as 96
input/output points, or as few as eight points.
FCPS-24 Field
Charger Power
Supply
The FCPS-24 is a compact, cost-effective remote power supply
and battery charger. This remote power supply consists of a
filtered 24 VDC output that can drive up to four Notification
Appliance Circuits.
Optional Devices for the AFP-400
