5-12
AFP-400 Installation
PN 50253:A2 03/12/96
UZC-256
Module
Zone Coding with the UZC-256
Mount UZC-256 mounts to the right of the CPU-400. Fasten the UZC-256 to
the base of the CHS-4 chassis using the four hex standoffs (provided),
screwed onto four PEM studs. Attach the UZC-256 to three of the four
standoffs using the mounting screws provided (see the illustration below).
Installing the UZC-256
into a CAB-400AA Cabinet
Overview
Aluminum
Standoff
Mounting the UZC-256 in a CAB-400AA Cabinet
UZC-256
UZC-256 CHS--4
UZC-256 CAB-400AA
Installing the UZC-256
into a CAB-3 Cabinet
Mounting the UZC-256 in a CAB-3 Cabinet
Step 2
Step 1
Step 2
Step 1
The UZC-256 mounts in the top right corner of the CAB-400AA. Fasten the
module to the back of the cabinet using the standoffs and screws. Refer to
the installation diagram below.
You can use the Notifier UZC-256 Universal Zone Coder for zone coding an
AFP-400 system. The UZC-256 monitors system status through the CPU-400
ACS annunciator port and outputs pre-programmed codes in response to
signals it receives. Refer to the UZC-256 manual for additional information.
