manualshive.com logo in svg

Northern Telecom NAC, User Manual

Share
Download
Northern Telecom NAC User Manual Download Page 469

Page grid

Electronic Private Automatic Branch Exchange and
Business Communication Systems

Network Administration
Center (NAC)

Supervisor’s User Guide

 1994 Northern Telecom

All rights reserved

Documentation Systems,
Northern Telecom 
522 University Avenue, 14th Floor
Toronto, Ontario  M5G 1W7

Information subject to change without notice.
Northern Telecom reserves the right to make
changes in design or components as progress in
engineering and manufacturing may warrant.

Meridian, Meridian 1, Meridian MAX, and NAC are
trademarks of Northern Telecom. 

HP, RuggedWriter, DeskJet, PaintJet, LaserJet, and
Vectra are trademarks of Hewlett-Packard. UNIFY
DBMS is a registered trademark of Unify Corporation.
DEC, VT, and LA 195i are trademarks of Digital
Equipment Corporation. XENIX, and MS/DOS are
registered trademarks of Microsoft Corporation. ENP
and Ethernet are copyrights of Communication
Machinery Corporation. PC and AT are trademarks of
International Business Machines Corporation.
Reflections is a registered trademark of Walker
Richer & Quinn, Inc. UNIX is a trademark of UNIX
System Laboratories Inc.

Publication number:

P0724352

Product release:

2

Document release:

Standard 1.0  

Date: 

November 1994

Printed in the United States of America

Summary of Contents for NAC






















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands