manualshive.com logo in svg

Northern Telecom NAC, User Manual

Share
Download
Northern Telecom NAC User Manual Download Page 344

Page grid

 18-2   International language support

P0724352   Standard 1.0    November 1994

Supervisor workstations

All of the supervisor workstations, except the DEC VT220, provide full
international support. The DEC VT220 provides partial international
support by utilizing the terminal’s DEC multinational character set. Refer to
the “Entering characters” section of this chapter for instructions on how to
enter international characters.

Dial-up supervisor

The dial-up supervisor feature is supported providing the person dialing
into the NAC Release 2 is using a NAC Release 2 supported supervisor
workstation. All language strings are displayed correctly on the remotely
logged in terminal or PC.

Printers

The following Hewlett Packard printers provide support for the
international characters in both tabular and graphical reports:

•

HP RuggedWriter (only in HP PCL mode)

•

HP PaintJet 3630

•

HP LaserJet series II

•

HP LaserJet series III

•

HP LaserJet series IV

•

HP LaserJet 4 Plus

•

HP DeskJet

•

HP DeskJet 500

•

HP DeskJet 560C

Configuring workstations

A workstation must be configured properly in order to have international
characters. If using a language specific keyboard, the workstation’s
keyboard language must be configured.

Summary of Contents for NAC






















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands