Northern Telecom NAC User Manual Download Page 116

Page: 116 / 469

Page grid

7-30 Network Report Definition

P0724352 Standard 1.0 November 1994

Follow this procedure to define the parameters:

Choose

“Network Report Definition” from the main menu.

The Network Report Definition submenu is displayed.

Choose

“Report Parameter Definition” from the submenu.

The Report Parameter Definition screen is displayed.

In the

Report Name field, enter Answering Spectrum Report.

In the

Use of Name field, choose “In menus and on reports” from the

[Options] menu.

In the

Style field, choose “Tabular” from the [Options] menu.

The Format, TIme Frame, and Nodes to Query fields appear.

In the

Format field, choose “Answering Spectrum” from the [Options]

menu.

This is the name assigned to the tabular format in Part 1. The name
appears at the end of the list. Press 0

↓

to advance to the end of the list.

Under Report Ranges, the system displays the fields which can be
defined for this format. In this case, the Destination ACD-DN field
appears.

In the

Time Frames field, choose “Day” from the [Options] menu.

The Day field appears in the Report Ranges.

In the

Nodes to Query field, choose “By Destination Node” from the

[Options] menu.
The Nodes, Group By, and And By fields are displayed.

In the

Nodes field, enter the address of a node on the network.

10 Leave the

And By field blank. Press {RETURN} to advance to the next

field.

In the

Group By field, Destination Node should already appear.

12 In the

Day field, enter –1 (for the previous day).

If this does not provide enough data for the report, enter –7..-1. This
provides a week’s worth of data.

13 Leave the

Destination ACD-DN field blank to select all ACD-DNs.

14 In the

Output Device field, choose a printer from the [Options] menu.

15 In the [Commands] menu, choose

“Print this report”.

It may take several minutes to generate the report depending on the
number of ACD-DNs on the node and the time interval chosen.

16 To save this report, select

“Save as a new personal report definition”

from the [Commands] menu.

Summary of Contents for NAC





















































































































































































































































































































































































































































































Search results

Summary of Contents for NAC

Reviews:

Brands by name

Popular brands

Northern Telecom NAC, User Manual

Search results

Summary of Contents for NAC

Reviews:

Brands by name

Popular brands