manualshive.com logo in svg

Northern Telecom NAC, User Manual

Share
Download
Northern Telecom NAC User Manual Download Page 30

Page grid

 The  Network Administration Center system   1-13

 Network Administration Center   

Supervisor’s User Guide   Product release 2

NAC limitations

The following is a list of NAC limitations:

•

The total number of CDNs and ACD-DNs cannot exceed 160 (16 per
Meridian MAX node is recommended)

•

CDN data is only available if the Meridian switch is running the
correct level of software (Release 17 and higher) and the Meridian
MAX node(s) have EAR/CCR enabled

•

RAN data is only available if the Meridian switch is running the
correct level of software (Release 17 and higher)

•

Supervisor queue size interflow data is only available if the Meridian
switch is running the correct level of software (Release 16 and higher)

•

IVR data is only available if the Meridian switch is running the correct
level of software (Release 18 and higher) and the Meridian MAX
node(s) have EAR/CCR enabled.

•

International language support is only apparent if the prescribed
printers and terminals are used.

NAC maximum values

The following is a list of maximum values supported for the NAC:

•

10

Meridian MAXs (nodal MIS) connected to the NAC

•

160 maximum network ACD-DN/CDN queues

(This is calculated from a recommended 16 queues per node, 
including both NACD-DNs and CDNs.)

•

38

supervisor workstations (with one printer and one network link 
assigned)

•

38

printers (with one supervisor workstation and one network link 
assigned)

•

80

network supervisor IDs

•

10

remote supervisor login positions

Summary of Contents for NAC






















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands