manualshive.com logo in svg

Northern Telecom NAC, User Manual

Share
Download
Northern Telecom NAC User Manual Download Page 239

Page grid

 Network Configuration Control   12-9

 Network Administration Center   

Supervisor’s User Guide   Product release 2

Change Network Night Routing Tables

The Change Network Night Routing Tables feature allows changes to be
made to the night target table for each NACD queue. This table is used to
route incoming calls when the queue is in night service. A night target table
cannot be defined for a queue which has a night number defined (although
this is not checked until the network configuration control change is
executed at the remote Meridian MAX system).

This feature specifies the source NACD-DN, up to 20 target NACD-DNs,
and the number of seconds the call should wait in the queue before it sends
a call request to the next target NACD-DN. All the Target and Time fields
must be completed in a column before entries can be made in the next
column.

Note:  When defining night routes, do not select CDNs as either source
or destination DNs for the purpose of rerouting calls. The Meridian
MAX does not include any CDNs in the lists sent to the NAC for use
in configuration control operations.

Figure 12-3
Network Configuration Control—Night Tables

                                                                            12:00:00

  Network Configuration Control – Night Tables

   NACD-DN        ––Target––   Time    ––Target––   Time    ––Target––   Time

 255–     500     4082221000     60    4082221007    240

                  4082221001     60                     

                  4082221002     60

                  4082221003     60

                  4082221004     60

                  4082221005     60

                  4082221006     60

 255–      501    Empty

HELP=Help  PF1=Commands  PF2=Options  F10=Display Execution Queue             F20=>>

Summary of Contents for NAC






















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands