manualshive.com logo in svg

Northern Telecom NAC, User Manual

Share
Download
Northern Telecom NAC User Manual Download Page 220

Page grid

 Standard management reports   11-53

 Network Administration Center   

Supervisor’s User Guide   Product release 2

Statistics on the Control DN Performance Report

Control DN

This field is the unique CDN identifier.

Base Time Unit

The time frame (for example, interval, day, week, month, or period) for
which the report was generated.

Calls Accpt

Total number of calls that entered the CDN.

Calls Answd

Number of calls answered for this CDN.

Avg Ans Del Sec

The average delay a caller experienced before the call was answered.

Long Ans Del Sec

The longest time a call waited before being answered.

Calls Abnd

The total number of calls accepted at the CDN, which were abandoned
while waiting to be answered through the controlled operation.

Long Abd Del Sec

The longest time a call waited before being abandoned.

Srv Lvl%

The percentage of calls answered or abandoned within the maximum delay
threshold.

CALL TERMINATION STATISTICS:
Route

The number of controlled mode calls that were given the “Route TO”
treatment by the CCR application.

Disc

The number of controlled calls that were given a “Force Disconnect”
treatment by the CCR application.

Summary of Contents for NAC






















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands