manualshive.com logo in svg

Northern Telecom NAC, User Manual

Share
Download
Northern Telecom NAC User Manual Download Page 315

Page grid

 Schedule Definition   16-7

 Network Administration Center   

Supervisor’s User Guide   Product release 2

Figure 16-2
Schedule Definition

—

Attached Reports screen

                                                                            12:00:00

  Schedule Definition – Attached Reports

  SCHEDULE NAME : East–West Comparisons

  SCHEDULED REPORTS                     COPIES

   West Coast ACD–DN Performance          2

   East Coast ACD–DN Performance          2

   Combined Network Report                9

HELP = Help

PF1

Commands

=

PF2 = Options

F6 = Add multiple reports

Function keys

Help=Help

Provides information regarding this feature and its fields.

PF1=Commands

The following commands are available after pressing [Commands]:

•

Exit (without saving changes)

Returns the system to the main menu.

•

Clear the form

Clears information from the screen, leaving a blank schedule
definition. This command should be used when a new schedule
definition is to be created.

•

Read an existing schedule definition

Displays an existing schedule definition.

Summary of Contents for NAC






















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands