manualshive.com logo in svg

Northern Telecom NAC, User Manual

Share
Download
Northern Telecom NAC User Manual Download Page 178

Page grid

 Standard management reports   11-11

 Network Administration Center   

Supervisor’s User Guide   Product release 2

ACD-DN Delay Before Abandoning Report

The ACD-DN Delay Before Abandoning Report shows the tolerance level
of the customers. It shows how many calls are abandoned and how long the
callers waited before they hung up.

The time categories field can be modified in the Spectrum Definition
feature, described in the “Network Report Definition” chapter.

The report shows if callers abandoned before or after hearing the recorded
announcement. This information can be used to decide when the recorded
announcements and music is to play, and encourage the callers to wait.

The key fields for the ACD-DN Delay Before Abandoning Report are
ACD-DN and Base Time Unit. A daily report for three queues over six days
is shown in the example.

Summary of Contents for NAC






















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands