manualshive.com logo in svg

Northern Telecom NAC, User Manual

Share
Download
Northern Telecom NAC User Manual Download Page 340

Page grid

 Supervisor Messaging   17-17

 Network Administration Center   

Supervisor’s User Guide   Product release 2

Outgoing Supervisor Messages

The Outgoing Supervisor Messages feature views, stores, deletes, releases
and holds outgoing supervisor messages. Up to 19 outgoing messages can
be stored. Once this limit is exceeded, the system automatically deletes the
oldest message. However, up to five messages can be placed on hold. This
prevents them from being deleted.

Accessing this feature

To access this feature, press [Commands] on one of the following screens:
the initial Supervisor Messaging, Read Message, Read Previous Message,
and Compose Message. Press the “Show outgoing” option from the
Commands pop-up. Figure 17-7 shows three messages and the location of
significant pieces of information.

Figure 17-7
Outgoing Supervisor Messages screen

Time stamp

Message contents

Message status

Message number &

message sender

                     Msg Waiting                                            12:00:00

  Outgoing Supervisor Messages

   1 NAC                  Tue Nov 27 16:41:47 1990  STD *Urgent*

  Please be advised that a severe snow storm has forced the closure of the

  New York office. Inform your node(s) that there will be an increase in call

  traffic by 16:45 (NAC time).

  Sent by the Network Administrator.

   2 Chicago              Tue Nov 27 16:02:39 1990  STD Acknowledged

  A Network Supervisor will be assigned to your node by 16:30 our time.

  Sent by the Network Administrator.

   3 Broadcast            Tue Nov 27 13:22:32 1990  STD Normal

  Please note: All nodes must prepare their standard reports before 17:00

  local time. Please submit these reports ASAP.

  Sent by Network Supervisor 1000.

HELP=Help  PF1=Commands  PF2=Options

Summary of Contents for NAC






















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands