manualshive.com logo in svg

Northern Telecom NAC, User Manual

Share
Download
Northern Telecom NAC User Manual Download Page 263

Page grid

 Network Configuration Control ad hoc mode   13-11

 

 Network Administration Center   

Supervisor’s User Guide   Product release 2

Function keys

Note:  The display and purpose of several of the function keys vary
depending on the feature from which the [Configuration Control]
command was invoked. For example, pressing [Commands] may
display a Commands pop-up on one screen or be used to return to the
main menu on the other. The purpose of all the function keys are
provided in this section.

Help=Help

Provides information regarding this feature and its fields.

PF1=Commands

The following options are available under the [Commands] function key if
[Configuration Control] is invoked from the Network ACD-DN Queue
Statistics, or Nodal Control DN Queue Statistics features:

•

Exit

Returns the system to the main menu.

•

NACD-DN Queue Statistics Display

Provides access to the Network ACD-DN Queue Statistics display, if
this option is highlighted.

•

CDN Queue Statistics Display

Provides access to the Nodal Control DN Queue Statistics. This
command is only offered if the CCR/EAR option is enabled. The CDN
Statistics must also be enabled in the supervisor’s profile.

PF1=Exit

Removes the ad hoc pop-up window from the screen. This function key is
available if the [Configuration Control] option is invoked from the Network
Details Display feature.

PF1=Exit

Returns the system to the main menu. This function key is available if the
[Configuration Control] option is invoked from the Network Position Status
Counts Display feature.

Summary of Contents for NAC






















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands