Northern Telecom NAC User Manual Download Page 339

Page: 339 / 469

Page grid

17-16 Supervisor Messaging

P0724352 Standard 1.0 November 1994

Function keys

Help=Help

Provides information regarding this feature and its fields.

PF1=Commands

The following commands are available by pressing [Commands]:

•

Exit

Returns the system to the initial Supervisor Messaging screen.

•

Delete Message

Deletes the message highlighted by the selection bar. The status for the
message changes to

Deleted

. However, the message is not removed

until the Incoming Supervisor Messages screen is exited.

•

Undelete Message

Restores the message highlighted by the selection bar. The status for
the message changes from

Deleted

to the status label assigned to it

when it was created (for example, normal, urgent, or acknowledge).

•

Hold/Release Message

Sets a toggle switch which either holds or releases a message. The
message status changes to

HELD

if this command is selected for a

message. After a message is released, the status message changes from

HELD

to the status label assigned to it when it was created (for

example, normal, urgent or acknowledge). Up to five messages can be
placed on hold.

PF1=Select no command

Removes the Command pop-up window from the screen.

PF2=Options

Displays a description or list of valid entries for the field.

PF2=Remove options pop-up

Closes the Options window.

Fields

There are no fields on this screen.

Summary of Contents for NAC





















































































































































































































































































































































































































































































Search results

Summary of Contents for NAC

Reviews:

Brands by name

Popular brands

Northern Telecom NAC, User Manual

Search results

Summary of Contents for NAC

Reviews:

Brands by name

Popular brands