Northern Telecom NAC User Manual Download Page 298

Page: 298 / 469

Page grid

15-28 Parameter Administration

P0724352 Standard 1.0 November 1994

Function keys

Help=Help

Provides information regarding this feature and its fields.

PF1=Commands

The following commands are available after pressing [Commands]:

•

Exit (without saving changes)

Returns the system to the Parameter Administration submenu without
saving any changes.

•

Read an existing unit definition

Retrieves an existing unit definition and displays the record on the
screen. Units are appended to the current display selection.

•

Save as the new Display CDN Selection

Saves the information.

•

Print the Display CDN Selection

Prints the Display CDN Selection information.

•

Clear Display CDN Selection

Clears the entire selection from the screen.

PF1=Select no command

Removes the Commands pop-up window from the screen.

PF2=Options

Displays a description or list of valid entries for the field.

PF2=Remove options pop-up

Removes the Options pop-up window from the screen.

PF3=Edit field

Allows the field to be edited.

PF3=End editing

Indicates that no further editing is required to the field.

F6=Insert Element

Inserts a list element between two existing list elements. It is used primarily
to insert an element in a logical place.

Summary of Contents for NAC





















































































































































































































































































































































































































































































Search results

Summary of Contents for NAC

Reviews:

Brands by name

Popular brands

Northern Telecom NAC, User Manual

Search results

Summary of Contents for NAC

Reviews:

Brands by name

Popular brands