manualshive.com logo in svg

Northern Telecom NAC, User Manual

Share
Download
Northern Telecom NAC User Manual Download Page 325

Page grid

17-2   Supervisor Messaging

P0724352   Standard 1.0    November 1994

Message indicator

Figure 17-1 shows the message indicator, which informs the network
supervisor that a message has been received.

This indicator remains on the screen as long as there is an unread message.
It is removed as soon as the first person reads the new message (assuming
there are no other new messages to be read). This makes it important for a
procedure to be developed to inform the network supervisors/network
administrators that there is/are message(s) to be read. It is recommended
that the network  administrator read the messages first. This ensures that the
appropriate personnel are notified.

Figure 17-1
Message indicator

                     Msg Waiting                                            12:00:00

  Outgoing Supervisor Messages

   1 NAC                 Tue Nov 27 16:41:47 1990  STD *Urgent*

  Please be advised that a severe snow storm has forced the closure of the

  New York office. Inform your node(s) that there will be an increase in call

  traffic by 16:45 (NAC time).

  Sent by the Network Administrator.

   2 Chicago              Tue Nov 27 16:02:39 1990  STD Acknowledged

  A Network Supervisor will be assigned to your node by 16:30 our time.

  Sent by the Network Administrator.

   3 Broadcast            Tue Nov 27 13:22:32 1990  STD Normal

  Please note: All nodes must prepare their standard reports before 17:00

  local time. Please submit these reports ASAP.

  Sent by Network Supervisor 1000.

Message waiting indicator

HELP = Help

PF1

Commands

=

PF2 = Options

Summary of Contents for NAC






















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands