Nortel Passport 4400, Using Manual, Page: 82 / 144

82
206906-D Rev 00 4.2
For example:
3
Use the Backspace or Delete key to delete the value.
4 Click the Apply button to complete the deletion.
5 Repeat steps 1 through 4 for each entry that you wish to delete.
If You Need to Reestablish the Install Tool Connection to Your
Passport 4400
If you change the IP Address configured for your Passport 4400, you will need to
reestablish the connection, as follows:
1
Click the Close button to close the Install Tool panel.
2
Choose Connect from the File menu.
The Install Tool Startup Definition panel opens.
3
Enter the new IP Address in the “Connect using an IP Address” field, then
click on IP Connect. Install Tool reconnects to your Passport 4400 using the
new IP Address.
Once you have completed these steps, you can continue with the configuration
process.
Note:
It may be necessary to use the Save & Reset feature before the new
configuration takes effect. See “Performing a Reset Operation” on
page 85 .