Nortel Passport 4400 Using Manual Download Page 49 | Manualshive

Page: 49 / 144

Nortel Passport 4400 Using Manual Download Page 49

49

Using Passport 4400 Install Tool Version 4.2

Default Gateway Option

You access the Default Gateway option from the TCP/IP Settings window:

There are several factors to consider when deciding whether or not to select the
Default Gateway option, including:

•

If you are using your workstation to access other services and applications on
the network, it is recommended that you deselect Use default gateway on
remote network. When the Use default gateway on remote network box is
checked, Windows routes all IP packets through the default gateway, which in
this case is the Passport 4400 PPP connection. This can significantly degrade
the performance of other network applications.

•

If you are using your workstation only for Passport 4400 device management
activities, it is recommended that you select the Use default gateway on
remote network option.

•

If you are using your workstation to manage remote Passport 4400s, it is
recommended that you select the Use default gateway on remote network.
option.

«
...
47
48
49
50
51
...
»

Summary of Contents for Passport 4400

















































































































































Reviews:

No comments