Nortel Passport 4400, Using Manual, Page: 111 / 144

111
Using Passport 4400 Install Tool Version 4.2
WAN Services
Install Tool allows you to configure the following features of your WAN services:
T1 CSU Full or Fractional T1, Time Slots (if Fractional is selected), Frame
Format, Clock Source, Line Build Out, B8ZS Status, DS0 Basic
Rate
56K CSU Clock Source
E1 CSU Full or Fractional E1, Time Slots (if Fractional is selected), CRC 4
Status, Clock Source
Protocol Configurable Parameters
Switching DLCI, CIR, Netlink Type, PANL or RFC 1490, LMI Type, LMI
Mode
HTDS (HDLC/SDLC) Type (Master or Slave), Remote End DNA, Remote End Port,
Local End DLCI, Remote End DLCI, Cut-Through Enable
CBR Type (Master or Slave), Local End DLCI, Remote End DNA,
Remote End Port, Remote End DLCI, Rx Queue Size, Tx
Queue Size
Frame Relay DCE Type (Master or Slave), LMI Type, Local DLCI, Remote DNA,
Remote Port, Remote DLCI
X.25 Remote DNA Prefix, Remote Virtual Port, X.25 Address
Pattern, X.25 Mode, LAPB Mode, Annex G DLCI
SNA Role, LS Address, LS Name, Encoding Method, Local SAP,
MAC Address, Remote SAP, Remote MAC, Remote DNA
Prefix, RFC 1490 DLCI
Async over TCP Interface Type, IP Address, Baud Rate, Data Bits, Flow Control,
Parity, Stop Bits, Connection Originator, TCP Listen Port
Interface Configurable Parameters (continued)