Nortel Passport 4400, Using Manual, Page: 59 / 144

59
Using Passport 4400 Install Tool Version 4.2
Overview of the Install Tool Menus
The Install Tool backpanel display provides four menus. Each is described below.
File Menu
The File menu offers the following options:
Wizard Menu
The Wizard menu lists all the wizards that are available for your specific
Passport 4400 configuration. Refer to
“Available Wizards” on page 62 for a
description of each wizard.
System Menu
The System menu offers the following options:
Option: Use this menu option to:
Connect make a connection to a different Passport 4400.
Exit close all Install Tool windows and exit the program.
Option: Use this menu option to:
Web Configurator launch the Passport 4400 Configurator interface. (Note that the Web
Configurator requires either Netscape Communicator 4.7 or higher,
or Internet Explorer 4.1 or higher. In addition, your browser must be
set to accept all cookies.)
Configure configure system-level parameters and system-level IP parameters
for the Passport 4400 to which you are presently connected.
System Status display the status of the Passport 4400 to which you are presently
connected.
Test run system-level diagnostic tests and display the results in the
Diagnostics panel.
Telnet launch a Telnet session to access the Command Line Interface
(CLI).
Ping ping an IP host in your network.