Nortel Passport 4400, Using Manual, Page: 79 / 144

79
Using Passport 4400 Install Tool Version 4.2
8 Reset the Passport 4400, then test the port to confirm that it is operational.
For additional information, see “Performing a Reset Operation” on page 85
and “Testing a Port” on page 84 .
Entering Multiple Values
Many Passport 4400 parameters accept multiple values. For example, in routing
mode, you can assign multiple LAN and WAN IP addresses to an interface.
Adding New Entries
To enter multiple values in a field that permits such, follow these steps:
1
Click the New button.
Install Tool displays empty fields in which you will enter your new entries.
For example:
2
Enter the new values.
In many dialog panels, Install Tool enters default or calculated values for you
when you click in an empty field.
3 Click the Apply button to save the new entry.
4
Repeat steps 1 through 3 for each new entry.
Note:
It is recommended that you always perform a Save & Reset
operation to ensure that your configuration changes take effect and are
retained.