Nortel Passport 4400, Using Manual, Page: 71 / 144

71
Using Passport 4400 Install Tool Version 4.2
For example:
3
Use the Backspace or Delete key to delete the value.
4
Repeat steps 1 through 3 for each entry that you wish to delete.
5
Click the Next button to complete the deletion.
If You Need to Reestablish the Install Tool Connection to Your
Passport 4400
If you change the IP Address that you used to establish a connection with your
Passport 4400, you will need to reestablish the connection, as follows:
1 Click on Exit to close the Install Tool panel.
2
Choose Connect from the File menu.
The Install Tool Startup Definition panel opens.
3
Enter the new IP Address in the “Connect using an IP Address” field, then
click on IP Connect. Install Tool reconnects to your Passport 4400 using the
new IP Address.
Once you have completed these steps, you can continue with the configuration
process.
Note:
It may be necessary to use the Save & Reset feature before the new
configuration takes effect. See “Resetting the Passport 4400” on page 72 .