Nortel Passport 4400, Using Manual, Page: 28 / 144

28
206906-D Rev 00 4.2
Ethernet Connection
The Passport 4400 is shipped from the factory with a pre-configured IP address
(192.168.200.200). You can connect your workstation to the unit using the
Ethernet port, as long as the workstation is in the same IP segment as the
Passport 4400.
Example
This illustration shows an Ethernet connection on a Passport 4460.
Other Connection Options
If your workstation’s Ethernet port is not configured for the same IP segment as
that of the Passport 4400, you must connect your workstation to the unit over the
management port, as described in
“Management Port Direct Connection” on
page 29 and “Management Port Modem Connection” on page 30 .
EXPANSION
2
P
O
R
T
2
P
O
R
T
3
PORT 1 P1 STATUS P3 STATUS
P2 STATUS
RST STAT 10/100 SYSTEM
STATUS
Passport 4460
Network
Interface Card
LAN Port