Nortel Modular ICS 6.0, Manual

Page: 44 / 294

44 / Answering calls
Modular ICS 6.0 System Coordinator Guide P0992640 03
Line buttons
One line button for each line is assigned to your telephone.
Press the line button to select the line you want to answer or
use to make a call. Having several line buttons gives you
immediate access to more than one line.
The M7100 or T7100 sets have two intercom paths which are
used instead of line buttons to answer and make calls. Each set
can be assigned two lines. You can press
³ to switch
between two calls, one active and one on hold.
What line indicators mean
Rings you may hear
º
Flashing on and off for
equal lengths of time There is an incoming call on the line
º
Flashing on and off more
quickly You have placed a call on hold
º
Flashing on for longer
than off Someone else has put a call on hold
on that line
º
On, not flashing You are connected to the call on that
line or the line is in use elsewhere
Off The line is free
A double beep every 10
seconds A call has been camped to your telephone.
A long single ring There is an external call on the line for you.
A shorter double ring There is an internal call on the line for you or
a call is being transferred to you.
A brief single ring A call is being redirected on one of your
redirected lines. You cannot answer this call.
Three beeps descending
in tone You are receiving a priority call.