Nortel Modular ICS 6.0, Manual

Page: 71 / 294

Making calls / 71
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Choosing a line using a line button
You have one line button for each line assigned to your
telephone. Press the line button to select the line you want to
answer or use to make a call. Having several line buttons
allows you immediate access to more than one line.
The M7100 and T7100 sets each have two intercom paths
which are used instead of line buttons to answer and make
calls. Each set can be assigned two lines. You can press
³
to switch between two calls, one active and one on hold.
The telephone you have called is on another
call. Press
LATER to use the Ring Again or
Message features.
The call you are trying to make has been
restricted in programming. A possible reason
is time-of-day restrictions on certain calls.
Press
YES
to use Ring Again. Press
NO
to
send a message. See Sending messages on
page 120 and Turning on Ring Again on
page 77.
Either you have no prime line, or the prime
line is in use, or the line programmed for an
autodial number, speed dial number, or
Hotline is in use. Select a line and dial again.
Press YES to send a message. See
Messages.
For other displays, see Common feature displays on page 247.
On another call
LATER
Restricted call
Ring Again?
YES NO EXIT
Select a line
Send message?
YES
NO