Nortel Modular ICS 6.0, Manual

Page: 223 / 294

Using System features / 223
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Turning the auxiliary ringer for a telephone on or off
You need the programming template found at the front of this
guide. See
Getting started with Norstar on page 13 for more
information.
1. Press
²¥¥ÛßßÜÝÝ.
2. Press
ÛÜßÝß (the default System Coordinator
password).
3. Press
≠
at
Terminals&Sets
.
4. Enter the internal number of the telephone you want to
program and press
≠
. The display reads
Capabilities
.
5. Press
≠
.
6. Press
‘
until the display reads
Aux. ringer
.
7. Use
CHANGE
to select
Y
(Yes) or
N
(No).
Your installer or customer service representative can program
the auxiliary ringer to start ringing for incoming lines as part
of Ringing Service.
Using Host System dialing signals
You can access host systems, such as private branch
exchanges (PBX) from Norstar by using host system signaling
features (known as end-to-end signaling). These features
either send a special signal to the host system or allow you to
program delays required by host systems in external autodial
or speed dial sequences.
Link
²àÚ