Nortel Modular ICS 6.0, Manual

Page: 171 / 294

Programming Hunt Groups / 171
P0992640 03 Modular ICS 6.0 System Coordinator Guide
4. Press
‘
until the display shows
System
prgrming
.
5. Press
≠
. The display shows Hunt groups .
6. Press
≠
. The display shows
Show group
.
7. Enter the Hunt Group number you want to program (1-30).
8. Press
≠
. The display shows
Member DNs:
.
9. Press
‘
until the display shows Q Timeout: .
10. Press
CHANGE
to set the queue time-out:
15, 30, 45, 60,
120, 180
.
11. Press
¨ to exit or
‘
to continue programming.
Programming the overflow set
This setting allows you to program the overflow set to which
the Hunt Group calls are to be routed. Unless the overflow
position is a Hunt Group set, the call ceases to be a Hunt Group
call. If the overflow set is a Hunt Group set, the call is treated
as a new call and goes to the bottom of the queue.
The overflow set can be a set DN number associated with a
voice mailbox.
1. Place the appropriate programming overlay on the set you
are using to do programming.
2. Press
²¥¥ÛßßÜÝÝ (CONFIG). The
display shows Password: .
3. Press
ÛÜßÝß (ADMIN). The display shows
Terminals&Sets
.
4. Press
‘
until the display shows
System
prgrming
.
5. Press
≠
. The display shows
Hunt groups
.