Nortel Modular ICS 6.0, Manual

Page: 113 / 294

Forwarding your calls / 113
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Displays while canceling redirection
You have one external line on your set, but
you need a second line to perform line
redirection. Redirect your external line using
a line pool as the outgoing line.
You are attempting to redirect a line and the
line you have chosen is the outgoing line you
have selected as a destination. You cannot
redirect a line to itself. Select another line.
Enter a valid line pool access code.
You have attempted to redirect a line, but
someone else has already redirected that
line. Press
¥
or
OVERRIDE
to override the
previous redirection and redirect the line as
you want.
You can redirect calls only on individual
lines.
Select the line that is used to redirect calls
out of the system.
Press the lines to be redirected. To undo a
line selection, press it again. Press
ALL
to
redirect all your lines.
Continue to press the lines to be redirected.
Press
³
or OK when you are finished.
The line you are attempting to redirect
cannot be redirected because the hardware
does not support redirection.
Press the lines that are no longer to be
redirected. The lines light up as you press
them. Once you cancel redirection for a line
you cannot restore it by pressing the line
again. Press
ALL
to cancel redirection for all
your lines. To end, press
³
or
OK
.
Continue to press the lines that are no longer
to be redirected. Press
³
or
OK
when you
are finished.
No line to use
Outgoing line
Pool code: ___
QUIT
Redir by 221
OVERRIDE
Redirect denied
Select line out
QUIT
Select line(s)
QUIT
ALL
Select line(s)
ALL OK
Unequipped line
Select line(s)
QUIT
ALL
Select line(s)
ALL OK