Nortel Modular ICS 6.0, Manual

Page: 110 / 294

110 / Forwarding your calls
Modular ICS 6.0 System Coordinator Guide P0992640 03
You cannot use the Line Redirection feature on an M7100 or
a T7100 set, or on a telephone connected to an ATA.
Turning on Line Redirection
Follow these steps to turn on Line Redirection on your set:
1. Press
²¡Ý.
2. Select the outgoing line to be used for redirected calls.
3. Enter the number to which calls are redirected.
Refer to the list below for suggestions.
4. Select the lines to be redirected.
In step 3, you can enter the telephone number to which you
want to redirect calls, using one of the following methods:
• Press an external autodial button.
• Enter an external telephone number (using no more than
24 digits) then press
³ or
OK
.
• Press
³ or
OK
if the line you have chosen as the
outgoing line is a private network line that does not require
you to dial digits.
If you use
ALL
to redirect all your lines, it is important that you
wait until all the lines on your telephone light up before
pressing
³ or
OK.
If you press
³ or
OK
before all the lines
light up, those lines not lit are not redirected.
Tip -
The line chosen for redirecting calls on other lines can be
used normally when it is not busy on a redirected call. To avoid
redirection failing because the chosen line is in use, choose a
line pool with several lines in it.