Nortel Modular ICS 6.0, Manual

Page: 73 / 294

Making calls / 73
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Programming a memory button with a line pool feature code
When you program a button with the line pool feature code,
you must enter a line pool access code after the feature code.
The programmed line pool button accesses a specific line pool,
not the line pool feature. See
Programming feature buttons on
page 139 for more information.
If you program a button with an indicator to access a line pool,
when all the lines in a line pool are busy, the indicator for the
line pool button turns on. The indicator turns off when a line
becomes available.
Making calls from an ISDN terminal
ISDN terminals do not have line keys or intercom keys as do
Norstar telephones. To make an outgoing call from an ISDN
terminal, access an external line by entering a line pool code
or by using the ARS feature.
Changing how you dial your calls
To change how how you dial your calls, use this feature:
1. Press
²¥¡Û.
2. Press
£ or
NEXT
until the dialing mode you want appears.
3. Press
³ or
OK
to select the displayed dialing mode.
Tip -
If no lines are available in the line pool, you can use Ring
Again at the busy tone. You are notified when a line in the line
pool becomes available. See Using Ring Again on page 77.