Nortel Modular ICS 6.0, Manual

Page: 179 / 294

Using the Hospitality features / 179
P0992640 03 Modular ICS 6.0 System Coordinator Guide
The table below shows an example of a call restrictions
setup.
Service times
You can set the time when occupied rooms change from
Service done to Service required. This setting affects the
Room condition feature.
1. Place the appropriate programming overlay on the set you
are using to do programming.
2. Press
²¥¥ÛßßÜÝÝ (CONFIG). The
display shows
Password:
.
3. Press
ÛÜßÝß (ADMIN). The display shows
Terminals&Sets .
4. Press
‘
until the display shows
Hospitality
.
5. At the Hospitality heading, press
≠
until
Service time
displays.
6. Press
≠
.
Hour: 00
displays.
7. Press
CHANGE
and enter the hour (00 to 23).
If the number is less than 13, the display shows
AM
. Press
CHANGE
to select
PM
, if required. Press
OK
to accept.
8. Press
≠
.
Minutes: 00
displays.
9. Press CHANGE and enter the minutes (00 to 59).
Room
Occupancy Filter Description
Vacant 11 no calls allowed except 911
Basic 11 no calls allowed except 911 and internal
extensions
Mid 12 no calls allowed except 911, 1800, 188
and internal extensions
Full 13 no call restrictions